How to Install your FREE PGA National Golf Course Upgrade

Free Upgrade to PGA National - The Champion Golf Course

Please enjoy this free upgrade to the famous PGA National Golf Course, compliments of Full Swing Golf and TruGolf. This course is now available for use in FSG's Online Tournaments.

The PGA National Champion Course. Originally designed by Tom and George Fazio for major tournament play, The Champion course at PGA National Resort & Spa was redesigned by Jack Nicklaus in 2014 and hosts the Honda Classic each spring on the PGA TOUR. It is widely known as being one of the toughest courses on the PGA TOUR.

NOTE: In order to install this update, you need to be running E6 version or higher. 

STEP 1: Check which version of E6 you are running. If you are currently running E6 version or higher, please proceed to step 2. If you have an older version of E6, please see this article.

WARNING: This version is NOT compatible with first generation Ion cameras. A firmware update is required to make the cameras compatible with this software. To determine your Ion firmware version, read this article or contact technical support for assistance.

STEP 2: Download the software and save it to your simulator computer. Alternatively, you may download this from any computer and transfer it using a USB drive (with at least 2GB of free space). This method is especially recommended if you have multiple sims.

 STEP 3: Install the software. This process may take several minutes. You may be prompted to update the IDS uEye driver, if so please click the "Install Driver" button. After the E6 update you will also be prompted to install the FSG SysTool, our simulator management tool. Reboot the computer when prompted.

STEP 4: Run E6. The first time E6 runs it will automatically add the course to your dongle. That's it, enjoy!


 If you have any questions, please contact


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request